Shelly Flood Detector WiFi Water Sensor

The SHELLY-FLOOD  you can monitor not only the temperature of your home but also receive an instant notification if there is water or liquid leakage detected.

SHELLY-FLOOD Detector WiFi Water Sensor Features

• No HUB is required.
• Long-lasting battery.
• You will receive a notification immediately if there is any liquid detected by Shelly Flood.
• Be aware of temperature fluctuations and keep your floor heating at the desired temperature.
• Free history on the cloud.
• It can be integrated to work with all other Shelly devices.
• Compatible with Android, iOS, Amazon Alexa, and home automation servers using MQTT, CoAP, and REST API.
• Easily make your Arduino project live and usable in your automation project.

SHELLY-FLOOD Detector WiFi Water Sensor Specification:

POWER

• Battery life: 18 months
• Battery type: 3 V Lithium CR123A – NOT included
• DO NOT use rechargeable batteries!
• Power supply AC: No
• Power supply DC: No

SPECIAL FUNCTIONS

• Illumination measurement: No
• Motion detection: No
• Open/Close: No
• Tilt angle detection: No
• Vibration detection: No
• Water detection: Yes
• Temperature measurement range: – 40°C ~ 60°C (± 1°C)
• Operational temperature: -40 to + 40 °C
• Device power consumption: < 1 W
• Local and remote control: Yes
• Sunrise/Sunset: Yes
• Weekly Schedule: yes

CONNECTIVITY

• Wireless/WiFi Protocol: 802.11 b/g/n
• Radiofrequency: 2400 – 2500 MHz
• Range: up to 50 m outdoors and up to 30 m indoors (depending on the building materials)

DIMENSIONS

• Size: 70mm x 19 mm